Cleaning & Sanitizing
Sanitizer concentrations, cleaning procedures, and equipment hygiene
How should food contact surfaces be cleaned if the water supply is temporarily cut off?
نمونه سؤالها همراه با پاسخ
چند سؤال از این مجموعه همراه با پاسخ و توضیح. آزمون تعاملی بالا از کل بانک سؤالات استفاده میکند.
-
1. What is the difference between cleaning and sanitizing?
- A. They are the same thing
- B. Neither is important in food service
- C. Sanitizing removes dirt; cleaning kills bacteria
- D. Cleaning removes visible dirt and food residue; sanitizing reduces bacteria to safe levels
نمایش پاسخ
پاسخ: D. Cleaning removes visible dirt and food residue; sanitizing reduces bacteria to safe levels
Cleaning removes visible dirt, food particles, and grease. Sanitizing reduces bacteria and other pathogens to safe levels. Both steps are necessary — you must clean before you sanitize.
-
2. A three-compartment sink is used for:
- A. Manual dishwashing: wash (with detergent), rinse (clean water), sanitize
- B. Washing vegetables
- C. Filling water glasses
- D. Storing dirty dishes
نمایش پاسخ
پاسخ: A. Manual dishwashing: wash (with detergent), rinse (clean water), sanitize
The three-compartment sink system: Compartment 1 — wash with hot detergent water, Compartment 2 — rinse with clean water, Compartment 3 — sanitize with chemical or hot water.
-
3. How should wiping cloths be stored when not in use?
- A. In your pocket
- B. On the counter to air dry
- C. In a bucket of sanitizer solution at the proper concentration
- D. In the garbage
نمایش پاسخ
پاسخ: C. In a bucket of sanitizer solution at the proper concentration
When not in use, wiping cloths must be stored in a bucket of sanitizer solution at the correct concentration. This prevents them from spreading bacteria when used.
-
4. What are the signs of pest infestation in a food establishment?
- A. Higher electricity bills
- B. Droppings, gnaw marks, nesting materials, grease trails, dead insects, damaged packaging, and unusual odours
- C. Increased customer complaints about taste
- D. Equipment breaking down more frequently
نمایش پاسخ
پاسخ: B. Droppings, gnaw marks, nesting materials, grease trails, dead insects, damaged packaging, and unusual odours
Signs include droppings (rodents, cockroaches), gnaw marks, nesting materials, grease trails along walls, live or dead pests, damaged packaging, and unusual musty or ammonia-like odours.
-
5. What is the recommended minimum contact time for QUAT sanitizers?
- A. نیازی به زمان تماس نیست
- B. 5 ثانیه
- C. حداقل 10 دقیقه
- D. حداقل 45 ثانیه، یا طبق دستور سازنده
نمایش پاسخ
پاسخ: D. حداقل 45 ثانیه، یا طبق دستور سازنده
استاندارد ظرفشویی دستی انتاریو خیساندن اقلام به مدت حداقل 45 ثانیه در QUAT با غلظت 200 ppm، در آب 24°C یا گرمتر را الزامی میکند. همیشه از دستورالعملهای سازنده و قوانین محلی خود پیروی کنید.
انگلیسی: At least 45 seconds, or as the manufacturer directs. Ontario's manual dishwashing standard calls for soaking items for at least 45 seconds in QUAT at 200 ppm, in water at 24°C or warmer. Always follow the manufacturer's directions and your local rules.
-
6. How often should food contact surfaces be cleaned and sanitized during continuous use?
- A. یک بار در پایان روز
- B. فقط وقتی بهوضوح کثیف باشد
- C. هفتهای یک بار
- D. بین کارها و انواع غذا، و در فواصل منظم (اغلب هر 4 ساعت) در طول استفاده
نمایش پاسخ
پاسخ: D. بین کارها و انواع غذا، و در فواصل منظم (اغلب هر 4 ساعت) در طول استفاده
سطوح در تماس با غذا را بین کارها، هنگام تغییر نوع غذا (بهویژه از خام به آمادهمصرف)، هر زمان که آلوده شوند، و در فواصل منظم در طول استفاده مداوم تمیز و ضدعفونی کنید. بسیاری از کدهای غذایی 4 ساعت را بهعنوان طولانیترین فاصله در نظر میگیرند.
انگلیسی: Between tasks and food types, and at regular intervals (often every 4 hours) during use. Clean and sanitize food contact surfaces between tasks, when switching food types (especially raw to ready-to-eat), whenever contaminated, and at regular intervals during continuous use. Many food codes use 4 hours as the longest interval.
نکات کلیدی
این یادداشتها به زبان انگلیسی و همراه با پیوند به منابع رسمی هستند.
- Interior Health (BC): wash with hot soapy water, rinse, then sanitize; chlorine at 100–200 ppm (about 5 mL of 5% bleach per litre) or quats at 200–400 ppm per the manufacturer.(source)
- Confirm sanitizer concentration with test strips, change bucket solutions every 2 hours or as needed, and clean and sanitize continuously used surfaces at least every 4 hours.(source)
- BC food service establishments must have written sanitation procedures that list cleaning and sanitizing agents and their concentrations (s. 24).(source)
اشتباهات رایج / Common mistakes
Sanitizing a dirty surface does not work: food residue protects bacteria and uses up the chemical. The order is clean, rinse, sanitize, air dry. More bleach is not better, and chlorine test strips cannot measure quaternary ammonium.
مطالب مرتبط
Sources and further reading (last reviewed November 2026)
Temperatures, training rules and fees are set by Health Canada, the CFIA, provincial governments and local public health units, and they change. Where this page states a regulatory fact, it is based on the official pages below. If anything here disagrees with them, the official source wins. You can read how we review and correct content.
این راهنما رایگان است و یک نفر آن را بهروز نگه میدارد.☕ حمایت کنید