HACCP Basics
Hazard analysis, critical control points, and food safety plans
HACCP Principle 2 is "Determine Critical Control Points (CCPs)." How do you determine a CCP?
نمونه سؤالها همراه با پاسخ
چند سؤال از این مجموعه همراه با پاسخ و توضیح. آزمون تعاملی بالا از کل بانک سؤالات استفاده میکند.
-
1. What does HACCP stand for?
- A. Health and Cleanliness Control Program
- B. Heating and Cooling Control Process
- C. Hazard Analysis and Critical Control Points
- D. Hygiene Audit and Compliance Check Protocol
نمایش پاسخ
پاسخ: C. Hazard Analysis and Critical Control Points
HACCP = Hazard Analysis and Critical Control Points. It is a systematic preventive approach to food safety that identifies, evaluates, and controls hazards.
-
2. Which of the following is an example of a CCP?
- A. Decorating a cake
- B. Ordering supplies
- C. Cooking chicken to 74°C internal temperature
- D. Choosing a paint colour for the kitchen
نمایش پاسخ
پاسخ: C. Cooking chicken to 74°C internal temperature
Cooking chicken to 74°C is a CCP because it is the point where the biological hazard (Salmonella) is eliminated by sufficient heat.
-
3. HACCP Principle 3 is "Establish Critical Limits." Which is an example of a critical limit?
- A. The kitchen opens at 6 AM
- B. Internal temperature of chicken must reach a minimum of 74°C
- C. Staff must wear blue uniforms
- D. Food must be ordered by Tuesday
نمایش پاسخ
پاسخ: B. Internal temperature of chicken must reach a minimum of 74°C
Critical limits are measurable boundaries that must be met at each CCP. Examples: minimum cooking temperatures, maximum cooling times, minimum sanitizer concentrations.
-
4. A food business does not have a written HACCP plan. What is the risk?
- A. هیچ خطری وجود ندارد — سوابق مکتوب بیفایده هستند
- B. نبود مستندات یعنی هیچ مدرکی برای مدیریت ایمنی غذا وجود ندارد و ممکن است خطرات کنترل نشوند
- C. فقط برای کسبوکارهای بزرگ اهمیت دارد
- D. طعم غذا بدتر میشود
نمایش پاسخ
پاسخ: B. نبود مستندات یعنی هیچ مدرکی برای مدیریت ایمنی غذا وجود ندارد و ممکن است خطرات کنترل نشوند
بدون یک برنامه مکتوب مبتنی بر HACCP، هیچ روش نظاممندی برای کنترل خطرات و هیچ سابقهای برای نشان دادن دقت لازم (due diligence) وجود ندارد. همه کسبوکارها قانوناً ملزم به داشتن آن نیستند، اما اکیداً توصیه میشود.
انگلیسی: No documentation means no proof food safety is managed, and hazards may go uncontrolled. Without a written HACCP-based plan, there is no systematic way to control hazards and no records to show due diligence. Not every business is legally required to have one, but it is strongly recommended.
-
5. What is a prerequisite program in the context of HACCP?
- A. A university degree in food science
- B. Basic conditions and practices such as sanitation, pest control, supplier approval, and staff hygiene that form the foundation for HACCP
- C. A cooking course taken before HACCP training
- D. A program completed before getting a job
نمایش پاسخ
پاسخ: B. Basic conditions and practices such as sanitation, pest control, supplier approval, and staff hygiene that form the foundation for HACCP
Prerequisite programs are foundational food safety practices (sanitation, pest management, supplier control, staff hygiene, maintenance) that must be in place before HACCP can be effectively implemented.
-
6. What is a CCP decision tree?
- A. A systematic series of yes/no questions used to determine whether a step in the food process is a Critical Control Point
- B. A type of plant
- C. A family tree of food safety officers
- D. A type of thermometer
نمایش پاسخ
پاسخ: A. A systematic series of yes/no questions used to determine whether a step in the food process is a Critical Control Point
A CCP decision tree is a logical tool that asks sequential questions to determine if a process step is a CCP: Can the hazard occur? Are preventive measures in place? Is this step designed to eliminate the hazard? Can contamination increase? Does a later step eliminate it?
نکات کلیدی
این یادداشتها به زبان انگلیسی و همراه با پیوند به منابع رسمی هستند.
- BC food service establishments must have written food handling procedures that identify critical control points, set critical limits, describe how limits are met, and state the actions taken when they are not (s. 23).(source)
- Two-stage cooling (60°C to 20°C in 2 hours, then to 4°C in 4 more) is a typical critical limit for cooling cooked food.(source)
اشتباهات رایج / Common mistakes
Students often confuse a critical control point (a step where a hazard can be prevented, eliminated or reduced, such as cooking or cooling) with any step in the process. Another frequent mix-up is between monitoring (checking a limit as you go) and verification (confirming the system works, for example by reviewing logs or calibrating thermometers).
مطالب مرتبط
Sources and further reading (last reviewed November 2026)
Temperatures, training rules and fees are set by Health Canada, the CFIA, provincial governments and local public health units, and they change. Where this page states a regulatory fact, it is based on the official pages below. If anything here disagrees with them, the official source wins. You can read how we review and correct content.
این راهنما رایگان است و یک نفر آن را بهروز نگه میدارد.☕ حمایت کنید